Информационное сообщение о поддержке российских организаций, участвующих в выполнении совместных научно-исследовательских проектов в составе международных консорциумов в рамочной программе Европейского союза «Горизонт 2020»

Министерство образования и науки Российской Федерации в рамках поддержки российских организаций, участвующих в выполнении совместных научно-исследовательских проектов в составе международных консорциумов в рамочной программе Европейского союза «Горизонт 2020», сообщает о подготовке к проведению в 2016 году конкурса по теме «Проведение исследований по приоритетным направлениям с участием научно-исследовательских организаций и университетов стран-членов ЕС в рамках многостороннего сотрудничества в программе "Горизонт 2020” на 2016-2017 гг».

На конкурс приглашаются российские организации, входящие в состав составе международных консорциумов по выполнению научно-исследовательских проектов рамочной программы Европейского Союза «Горизонт 2020» на 2016-2017 гг.

Тематика проектов, представляемых на конкурс, должна соответствовать отобранным приоритетным тематикам рамочной программы «Горизонт 2020» на 2016-2017 гг. Обращаем Ваше внимание, что список отобранных тематик будет дополняться.

Информация об отобранных тематиках также доступна на английском языке на официальном сайте программы «Горизонт 2020».

CALL: FOR NANOTECHNOLOGIES, ADVANCED MATERIALS, BIOTECHNOLOGY AND PRODUCTION

1. NMBP-02-2016 Advanced Materials for Power Electronics based on wide bandgap semiconductor devices technology
2. NMBP-03-2016 Innovative and sustainable materials solutions for the substitution of critical raw materials in the electric power system
3. NMBP-01-2016 Novel hybrid materials for heterogeneous catalysis
4. NMBP-26-2016 Analytical techniques and tools in support of nanomaterial risk assessment
5. NMBP-17-2016 Advanced materials solutions and architectures for high efficiency solar energy harvesting
6. NMBP-19-2017 Cost-effective materials for “power-to-chemical” technologies
7. NMBP-18-2016 Advanced materials enabling the integration of storage technologies in the electricity grid
8. NMBP-07-2017 Systems of materials characterisation for model, product and process optimization
9. NMBP-11-2016 ERA-NET on Nanomedicine
10. BIOTEC-01-2016: ERA-NET Cofund on Biotechnologies
11. BIOTEC-02-2016: Bioconversion of non-agricultural waste into biomolecules for industrial applications
12. BIOTEC-03-2016: Microbial chassis platforms with optimized metabolic pathways for industrial innovations through systems biology
13. BIOTEC-05-2017: Microbial platforms for CO2-reuse processes in the low-carbon economy
14. BIOTEC-06-2017: Optimisation of biocatalysis and downstream processing for the sustainable production of high value-added platform chemicals
15. BIOTEC-07-2017: New Plant Breeding Techniques (NPBT) in molecular farming: Multipurpose crops for industrial bioproducts

CALL - GREENING THE ECONOMY CLIMATE SERVICES

16. SC5-01-2016-2017: Exploiting the added value of climate services ((IA1)
17. SC5-02-2017: Integrated European regional modelling and climate prediction system (RIA)
18. SC5-03-2016: Climate services market research (RIA)
19. SC5-04-2017: Towards a robust and comprehensive greenhouse gas verification system (RIA)
20. SC5-05-2016: A 1.5 million year look into the past for improving climate predictions (CSA)
21. SC5-08-2017: Large-scale demonstrators on nature-based solutions for hydrometeorological risk reduction (IA)
22. SC5-10-2016: Multi-stakeholder dialogue platform to promote innovation with nature to address societal challenges (CSA)
23. SC5-11-2016: Supporting international cooperation activities on water (CSA)
24. SC5-16-2016-2017: Raw materials international co-operation (CSA)
25. SC5-18-2017: Novel in-situ observation systems (RIA)
26. SC5-28-2016: Transformations to sustainability (ERA-NET-Cofund)
27. SC5-20-2016: European data hub of the GEOSS information system

CALL: SMART AND SUSTAINABLE CITIES' (ON SUSTAINABLE CITIES THROUGH NATUREBASED SOLUTIONS)

28. SCC-03-2016: New governance, business, financing models and economic impact assessment tools for sustainable cities with nature-based solutions (urban re-naturing) (RIA)

CALL: BLUE GROWTH – DEMONSTRATING AN OCEAN OF OPPORTUNITIES

29. BG-4-2017: Multi-use of the oceans marine space, offshore and near-shore: Enabling technologies
30. BG-09-2016: An integrated Arctic observation system (RIA)
31. BG-10-2016: Impact of Arctic changes on the weather and climate of the Northern Hemisphere (RIA)
32. BG-11-2017: The effect of climate change on Arctic permafrost and its socio-economic impact, with a focus on coastal areas (RIA)
33. BG-1-2016: Large-scale algae biomass integrated biorefineries
34. BG-5-2016: ERANET COFUND on marine technologies
35. BG-9-2016: An integrated Arctic observing system
36. BG-10-2016: Impact of Arctic changes on the weather and climate of the Northern Hemisphere
37. BG-11-2017: Climate impacts on Arctic permafrost, with a focus on coastal areas, and its socio-economic impact

CALL: COMPETITIVE LOW-CARBON ENERGY (ON APPLIED GEO-SCIENCES)

38. LCE-26-2016: Cross-thematic ERA-NET on Applied Geosciences (ERA-NET Cofund)

CALL: INNOVATIVE, SUSTAINABLE AND INCLUSIVE BIOECONOMY

39. ISIB-04b-2015 - Improved forest management models

CALL: SUPPORT TO POLICY AND INTERNATIONAL COOPERATION

40. INFRASUPP-01-2016: Policy and international cooperation measures for research infrastructures
41. INFRASUPP-02-2017: Policy and international cooperation measures for research infrastructures

CALL: SUSTAINABLE FOOD SECURITY – RESILIENT AND RESOURCE-EFFICIENT VALUE CHAINS

42. SFS-01-2016: Solutions to multiple and combined stresses in crop production
43. SFS-02-2016: Teaming up for good: Exploiting the benefits of species diversity in cropping systems
44. SFS-03-2016: Testing and breeding for sustainability and resilience in crops
45. SFS-05-2017: Robotics Advances for Precision Farming
46. SFS-10-2017: Research and approaches for emerging diseases in plants and terrestrial livestock
47. SFS-12-2016: Support for international research on animal health
48. SFS-13-2017: Validation of diagnostic tools for animal and plant health
49. SFS-14-2016: Understanding host-pathogen-environment interactions
50. SFS-15-2016-2017: Breeding livestock for resilience and efficiency
51. SFS-17-2017: Innovations in plant protection
52. SFS-19-2016: ERA-NET Cofund: Public-Public Partnerships in the bioeconomy
53. SFS-21-2016/2017: Advancing basic biological knowledge and improving management tools for commercially important fish and other seafood species
54. SFS-22-2017: Smart fisheries technologies for an efficient, compliant and environmentally friendly fishing sector
55. SFS-26-2016: Legumes - Transition paths to sustainable legume-based farming systems and agri-feed and food chains
56. SFS-26-2016: Legumes - Transition paths to sustainable legume-based farming systems and agri-feed and food chains
57. SFS-31-2016: Farming for tomorrow: developing an enabling environment for resilient and sustainable agricultural systems
58. SFS-32-2017: Promoting and supporting eco-intensification of aquaculture production systems: inland (including fresh water), coastal zone and offshore
59. SFS-33-2016: Understanding food value chain and network dynamics
60. SFS-34-2017: Innovative agri-food chains: unlocking the potential for competitiveness and sustainability
61. SFS-35-2017: Innovative solutions for sustainable food packaging
62. SFS-37-2016: The impact of consumer practices in food safety: risks and mitigation strategies
63. SFS-40-2017: Sweeteners and sweetness enhancers
64. SFS-46-2017: Alternative production system to address anti-microbial drug usage, animal welfare and the impact on health

CALL: BIO-BASED INNOVATION FOR SUSTAINABLE GOODS AND SERVICES - SUPPORTING THE DEVELOPMENT OF A EUROPEAN BIOECONOMY

65. BB-1-2016: Sustainability schemes for the bio-based economy
66. BB-2-2017: Towards a methodology for the collection of statistical data on bio-based industries and bio-based products
67. BB-3-2017: Adaptive tree breeding strategies and tools for forest production systems resilient to climate change and natural disturbances
68. BB-4-2016: Intelligent solutions and tools in forest production systems, fostering sustainable supply of quality wood for the growing bioeconomy
69. BB-5-2017: Bio-based products: Mobilisation and mutual learning action plan
70. BB-6-2016: The regional dimensionof Bio-based industries

CALL: RURAL RENAISSANCE - FOSTERING INNOVATION AND BUSINESS OPPORTUNITIES

71. RUR-13-2017: Building a future science and education system fit to deliver to practice

CALL: PERSONALISED MEDICINE

72. SC1-PM-01-2016: Multi omics for personalised therapies addressing diseases of the immune system
73. SC1-PM-02-2017: New concepts in patient stratification
74. SC1-PM-03–2017: Diagnostic characterisation of rare diseases
75. SC1-PM-04–2016: Networking and optimising the use of population and patient cohorts at EU level
76. SC1-PM-05–2016: The European Human Biomonitoring Initiative
77. SC1-PM-06–2016: Vaccine development for malaria and/or neglected infectious diseases
78. SC1-PM-07–2017: Promoting mental health and well-being in the young
79. SC1-PM-08–2017: New therapies for rare diseases
80. SC1-PM-09–2016: New therapies for chronic diseases
81. SC1-PM-10–2017: Comparing the effectiveness of existing healthcare interventions in the adult population
82. SC1-PM-11–2016-2017: Clinical research on regenerative medicine
83. SC1-PM-12–2016: PCP - eHealth innovation in empowering the patient
84. SC1-PM-13–2016: PPI for deployment and scaling up of ICT solutions for active and healthy ageing
85. SC1-PM-14–2016: EU-Japan cooperation on Novel ICT Robotics based solutions for active and healthy ageing at home or in care facilities
86. SC1-PM-15-2017: Personalised coaching for well-being and care of people as they age
87. SC1-PM-16–2017: In-silico trials for developing and assessing biomedical products
88. SC1-PM-17–2017: Personalised computer models and in-silico systems for well-being
89. SC1-PM-18–2016: Big Data supporting Public Health policies
90. SC1-PM-19–2017: PPI for uptake of standards for the exchange of digitalised healthcare records
91. SC1-PM-20-2017: Development of new methods and measures for improved economic evaluation and efficiency measures in the health sector
92. SC1-PM-21-2016: Implementation research for scaling-up of evidence based innovations and good practice in Europe and low- and middle-income countries
93. SC1-HCO-01-2016: Valorisation of FP7 Health and H2020 SC1 research results
94. SC1-HCO-02-2016: Standardisation of pre-analytical and analytical procedures for in vitro diagnostics in personalised medicine
95. SC1-HCO-03–2017: Implementing the Strategic Research Agenda on Personalised Medicine
96. SC1-HCO-04–2016: Towards globalisation of the Joint Programming Initiative on Antimicrobial resistance
97. SC1-HCO-05–2016: Coordinating personalised medicine research
98. SC1-HCO-06–2016: Towards an ERA-NET for building sustainable and resilient health system models
99. SC1-HCO-07–2017: Global Alliance for Chronic Diseases (GACD)
100. SC1-HCO-08–2017: Actions to bridge the divide in European health research and innovation

SC1-HCO-09–2016: EU m-Health hub including evidence for the integration of mHealth in the healthcare systems

101. SC1-HCO-10–2016: Support for Europe’s leading Health ICT SMEs
102. SC1-HCO-11–2016: Coordinated action to support the recognition of Silver Economy opportunities arising from demographic change
103. SC1-HCO-12–2016: Digital health literacy
104. SC1-HCO-13-2016: Healthcare Workforce IT skills
105. SC1-HCO-14–2016: EU-US interoperability roadmap
106. SC1-HCO-15-2016: EU eHealth Interoperability conformity assessment
107. SC1-HCO-16-2016: Standardisation needs in the field of ICT for Active and Healthy Ageing

CALL: HORIZON 2020 DEDICATED SME INSTRUMENT 2016-2017

108. SMEInst-05-2016-2017 - Supporting innovative SMEs in the healthcare biotechnology sector
109. SMEInst-06-2016-2017 - Accelerating market introduction of ICT solutions for Health, Well-Being and Ageing Well

CALL: UNDERSTANDING EUROPE - PROMOTING THE EUROPEAN PUBLIC AND CULTURAL SPACE

110. H2020-SC6-CULT-COOP-2016-2017 - Virtual museums and social platform on European digital heritage, memory, identity and cultural interaction

CALL: MOBILITY FOR GROWTH

111. MG-1.1-2016 Reducing energy consumption and environmental impact of aviation
112. MG-1.4-2016-2017 Breakthrough innovation
113. MG-6.1-2016 Innovative concepts, systems and services toward 'mobility as a service
114. MG-1.5-2016-2017 Identification of gaps, barriers and needs in the aviation research
115. MG-3.1-2016 Addressing aviation safety challenges
116. MG-8.1-2016 Research, technology development and market trends for the European transport manufacturing industries
117. MG-1.2-2017 Reducing aviation noise
118. MG-1.3-2017 Maintaining industrial leadership in aeronautics
119. MG-1.4-2016-2017 Breakthrough innovation
120. MG-1.5-2016-2017 Identification of gaps, barriers and needs in the aviation research

CALL: INDUSTRY 2020 IN THE CIRCULAR ECONOMY

121. H2020-FOF-01-2016 Novel hybrid approaches for additive and subtractive manufacturing machines

CALL: INTEGRATING AND OPENING RESEARCH INFRASTRUCTURES OF EUROPEAN INTEREST

122. INFRAIA-1-2014-2015 - Integrating and opening existing national and regional research infrastructures of European interest
123. INFRAIA-02-2017 Integrating Activities for Starting Communities

CALL: ENERGY EFFICIENCY

124. EE 1 – 2017 Waste heat recovery from urban facilities and re-use to increase energy efficiency of district or individual heating and cooling systems
125. EE 2 – 2017 Improving the performance of inefficient district heating networks
126. EE 4 – 2016 New heating and cooling solutions using low grade sources of thermal energy

CALL: COMPETITIVE LOW-CARBON ENERGY

127. LCE 1 – 2016/2017 Next generation innovative technologies enabling smart grids, storage and energy system integration with increasing share of renewables: distribution network
128. LCE 2 – 2016 Demonstration of smart grid, storage and system integration technologies with increasing share of renewables: distribution system
129. LCE 6 -2017 New knowledge and technologies
130. LCE 7 -2016 /2017 Developing the next generation technologies of renewable electricity and heating/cooling
131. LCE 8 – 2016/2017 Development of next generation biofuel technologies
132. LCE 10 – 2017 Reducing the cost of PV electricity
133. LCE 12 – 2017 Near-to-market solutions for the use of solar heat in industrial processes
134. LCE 17 – 2017 Easier to install and more efficient geothermal systems for retrofitting buildings
135. LCE 18 – 2017 EGS in different geological conditions
136. LCE 19 – 2016/2017 Demonstration of the most promising advanced biofuel pathways
137. LCE 27 – 2017 Measuring, monitoring and controlling the risks of CCS, EGS and unconventional hydrocarbons in the subsurface
138. LCE 28 – 2017 Highly flexible and efficient fossil fuel power plants
139. LCE 30 – 2017 Geologicalstoragepilots

CALL: CLEAN SKY 2

140. JTI-CS2-2016-CFP03-AIR-01-15: Functional top coat for natural laminar flow
141. JTI-CS2-2016-CFP03-AIR-01-16: Design Guide Lines and Simulation Methods for Additive Manufactured Titanium Components
142. JTI-CS2-2016-CFP03-AIR-01-17: Orbital Drilling of small (<10mm diameter) holes, standardly spaced with aluminium material in the stack
143. JTI-CS2-2016-CFP03-AIR-01-18: Research and development of a compact drilling and fastening unit suitable for a range of standard 2 piece fasteners
144. JTI-CS2-2016-CFP03-AIR-01-19: Hybrid Aircraft Seating Requirement Specification and Design - HAIRD
145. JTI-CS2-2016-CFP03-AIR-02-17: Flexible Test Rig of Aircraft Control Surfaces powered by EMAs
146. JTI-CS2-2016-CFP03-AIR-02-18: Prototype Tooling for subcomponents manufacturing for wing winglet
147. JTI-CS2-2016-CFP03-AIR-02-19: Prototype Tooling for Sub-Assembly, Final Assembly and Transport of the Morphing Winglet and Multifunctional Outer Flaps of the next generation optimized wing box
148. JTI-CS2-2016-CFP03-AIR-02-20: Low cost Fused Filament Fabrication of high performance thermoplastics for structural applications
149. JTI-CS2-2016-CFP03-AIR-02-21: Innovative Tooling Design and Manufacturing for Thermoplastic Stringers and High Integration
150. JTI-CS2-2016-CFP03-AIR-02-22: Adaptive multifunctional innovative Test Rigs for both structural test of multidimensional and multishape panels and structural tests on Tail unit
151. JTI-CS2-2016-CFP03-AIR-02-23: Automation of hand lay-up manufacturing process for composite stiffeners
152. JTI-CS2-2016-CFP03-AIR-02-24: Tests for leakage identification on Aircraft fluid mechanical installations
153. JTI-CS2-2016-CFP03-AIR-02-25: Development and demonstration of materials and manufacturing process for high structural damping composite beams for civil rotor and airframe applications
154. JTI-CS2-2016-CFP03-AIR-02-26: Development of innovative automated fiber placement machine for composite fuselage manufacturing with high performance hybrid materials.
155. JTI-CS2-2016-CFP03-AIR-02-27: Development, fabrication, verification and delivery of innovative and flexible system for automated drilling and fastener insertion on fuselage barrel.
156. JTI-CS2-2016-CFP03-AIR-02-28: Development of equipment for composite recycling process of uncured material
157. JTI-CS2-2016-CFP03-ENG-01-05: Optimisation of sensor and associated data acquisition system for blade behaviour
158. JTI-CS2-2016-CFP03-ENG-01-06: Very high loaded planet bearings enabling technologies
159. JTI-CS2-2016-CFP03-ENG-01-07: Advanced mechatronics devices for electrical management system of Turboprop
160. JTI-CS2-2016-CFP03-ENG-01-08: Advanced Bearings for Turboprop engine
161. JTI-CS2-2016-CFP03-ENG-01-09: Integrated air-oil cooling system
162. JTI-CS2-2016-CFP03-ENG-02-04: Automated full faced measurement of complex geometries
163. JTI-CS2-2016-CFP03-ENG-03-09: Orbiting Journal Bearing Rig
164. JTI-CS2-2016-CFP03-ENG-03-10: Innovations in Titanium investment casting of lightweight structural components for aero engines
165. JTI-CS2-2016-CFP03-ENG-03-11: Aerodynamic rigs for VHBR IP Turbine
166. JTI-CS2-2016-CFP03-ENG-03-12: Development of intelligent oil system enablers for large VHBR engine oil lubrication and heat management systems
167. JTI-CS2-2016-CFP04-ENG-01-10 High speed turbine performance improvement through cascade tests
168. JTI-CS2-2016-CFP04-ENG-01-11 2 VBV actuators (LHS & RHS) for Ground Test Demo. 2 VSV booster actuators (LHS & RHS) for Ground Test Demo
169. JTI-CS2-2016-CFP04-ENG-01-12 Development of the investment casting process and weldability for high temperature capable superalloys
170. JTI-CS2-2016-CFP04-ENG-01-13 High load gear and bearings materials
171. JTI-CS2-2016-CFP04-ENG-01-14 Experimental & Numerical analysis dedicated to FOD Management for Turboprop Air intake
172. CS2-2016-CFP04-ENG-02-05 Substitution of Chromium(VI)-based substances for corrosion protection of Aluminum- and Magnesium alloys
173. JTI-CS2-2016-CFP04-ENG-03-13 Small-Scale Spin Test for Hoop-Burst Overspeed Assessment
174. JTI-CS2-2016-CFP04-ENG-03-14 Fuel injector coking
175. JTI-CS2-2016-CFP04-ENG-04-06 Engine Control System
176. JTI-CS2-2016-CFP03-FRC-01-02: Development and demonstration of materials and manufacturing process for high power density homokinetic drive joints for civil rotor applications
177. JTI-CS2-2016-CFP03-FRC-01-07: Next generation smart active inceptors for a civil tiltrotor
178. JTI-CS2-2016-CFP03-FRC-01-08: High Speed HVDC Generator/Motor
179. JTI-CS2-2016-CFP03-FRC-01-09: Power Distribution
180. JTI-CS2-2016-CFP03-FRC-01-10: Next Generation Fuel Storage System
181. JTI-CS2-2016-CFP03-FRC-02-09: Light weight, impact resistant, canopy for fast compound rotorcraft
182. JTI-CS2-2016-CFP03-FRC-02-11: Design and realization of equipped engine compartments for a fast compound rotorcraft
183. JTI-CS2-2016-CFP03-FRC-02-15: Advanced Health Monitoring System for next generation materials
184. JTI-CS2-2016-CFP03-LPA-01-12: High cycle fatigue prediction methodology for fiber reinforced laminates for aircraft structures in CROR environment – development and validation
185. JTI-CS2-2016-CFP03-LPA-01-13: Manufacturing of prototype elements for hybridation of titanium and epoxy resin - Characterisation of the Titanium TiCP40 - CFRP adhesive joint
186. JTI-CS2-2016-CFP03-LPA-01-14: Automated injection RTM system process based in innovative sensor technologies in a low cost smart manufacturing tooling prototype and any tooling involved in the manufacture or the validation of the structure
187. JTI-CS2-2016-CFP03-LPA-01-15: High Fidelity time-accurate CFD Simulations
188. JTI-CS2-2016-CFP03-LPA-01-16: Aerodynamic Isolated and Installed Methods for UHBR Adaptable Area Nozzles
189. JTI-CS2-2016-CFP03-LPA-01-17: Windtunnel test for flow control at the engine/pylon with a representative aircraft configuration under fully realistic flow conditions
190. JTI-CS2-2016-CFP03-LPA-02-11: Structural energy storage and power generation functionalities in multifunctional composite structures
191. JTI-CS2-2016-CFP03-LPA-02-12: Development of System Components for automated Cabin and Cargo Installation
192. JTI-CS2-2016-CFP03-LPA-02-13: Design for Automated Installation of Linings and Hatracks in Cabin and Cargo
193. JTI-CS2-2016-CFP03-LPA-02-14: Assembly Planning and Simulation of an Aircraft Final Assembly Line (FAL)
194. JTI-CS2-2016-CFP03-LPA-03-07: Secured and performant wireless connection based on light (LiFi) for EFB, headset and other pilot connected devices
195. JTI-CS2-2016-CFP03-REG-01-02: Green Turboprop configuration - Natural Laminar Flow adaptive wing concept aerodynamic experimental validation (WTT2)
196. JTI-CS2-2016-CFP03-REG-01-03: Aileron Actuation Subsystem using EMAs
197. JTI-CS2-2016-CFP03-REG-01-04: Development and delivery of a flexible assembly system based on reverse engineering, tolerance analysis and Determinant Assembly Approach of wing box
198. JTI-CS2-2016-CFP03-SYS-01-02: Mems Accelerometer– Maturity Assessment And Improvement
199. JTI-CS2-2016-CFP03-SYS-02-14: Development of electromechanical actuators and electronic control units for flight control systems
200. JTI-CS2-2016-CFP03-SYS-02-15: Smart oil pressure sensors for all oil cooled starter/generator
201. JTI-CS2-2016-CFP03-SYS-02-16: Optimization two phases cooling solution using micro pump brick
202. JTI-CS2-2016-CFP03-SYS-02-17: innovative pump architecture for cooling electrical machine
203. JTI-CS2-2016-CFP03-SYS-02-18: Eco Design: Injection of thermoplastic reinforced with long fibers (carbon, glass, Kevlar…) for scroll reinforcement
204. JTI-CS2-2016-CFP03-SYS-02-19: Eco Design: Composite functionalization: thermal and electrical conductivity
205. JTI-CS2-2016-CFP03-SYS-02-20: Eco Design: Screening and development of optimized materials (wires, resins and varnishes) for high temperature coils
206. JTI-CS2-2016-CFP03-SYS-02-21: Model-Based identification and assessment of aircraft electrical and thermal loads architecture management functions
207. JTI-CS2-2016-CFP03-SYS-03-04: Low Power De-Icing System suitable for Small Aircrafts
208. JTI-CS2-2016-CFP03-SYS-03-05: Eco Design: High efficient non-structural landing gear parts based on advanced carbon fiber material systems and highly automated production technologies for helicopter and aircrafts.
209. JTI-CS2-2016-CFP03-SYS-03-06: Eco Design : Electrocoating process for Cr6-free surface treatment of aluminium parts
210. JTI-CS2-2016-CFP04-SYS-01-03 Very high brightness & compact full color display for next generation eyes-out cockpit products
211. JTI-CS2-2016-CFP04-SYS-02-22 Validation tests of electromechanical actuators and its dedicated control units at TRL 6 level
212. JTI-CS2-2016-CFP04-SYS-02-23 ECO-design based techniques and machinary for improved racking and distribution boxes manufacturing
213. JTI-CS2-2016-CFP04-SYS-02-24 Electrical simulation model identification method and tool
214. JTI-CS2-2016-CFP04-SYS-02-25 Innovative cooling system for embedded power electronics
215. JTI-CS2-2016-CFP04-SYS-02-26 Multivariable control approach for electrical air conditioning pack
216. JTI-CS2-2016-CFP04-SYS-02-27 Alternative recirculation filter for better cabin air quality
217. JTI-CS2-2016-CFP04-SYS-02-28 Analysis, validation and parametric studies of design and operating parameters for modern cabin ventilation concepts related to future aircraft energy management systems
218. JTI-CS2-2016-CFP04-SYS-03-07 An innovative Electrical Power Distribution System (EPDS) for Small Aircraft
219. JTI-CS2-2016-CFP04-SYS-03-08 Electromechanical actuation for landing gear
220. JTI-CS2-2016-CFP04-LPA-01-18 New Acoustic Signal Processing Methods
221. JTI-CS2-2016-CFP04-LPA-01-19 High fidelity Large Eddy Simulation using reduced model for engine broadband noise prediction
222. JTI-CS2-2016-CFP04-LPA-01-20 Hybrid machining for high removal rates and surface integrity applicable for safety critical super alloy parts
223. JTI-CS2-2016-CFP04-LPA-01-21 Design for High AN² (Disk and Blade attached)
224. JTI-CS2-2016-CFP04-LPA-01-22 RIGHT (Rig instrumentation, test support & data analysis of High Speed Power Turbine)
225. JTI-CS2-2016-CFP04-LPA-01-23 Low Cost, Smart Tooling for Composites
226. JTI-CS2-2016-CFP04-LPA-01-24 High throughput micro drilling (HTMD) system
227. JTI-CS2-2016-CFP04-LPA-01-25 Smart amplifier and a control box for fluidic actuators
228. JTI-CS2-2016-CFP04-LPA-01-26 Design, Build and Test Innovative Actuation Concepts for Separation Flow Control
229. JTI-CS2-2016-CFP04-LPA-01-27 Development of scaled models for Synthetic Jet Actuators based on Aerodynamic Characterization in CFD, Ground and Wind Tunnel Testing
230. JTI-CS2-2016-CFP04-LPA-01-28 Divergent Aircraft Configurations
231. JTI-CS2-2016-CFP04-LPA-02-15 Development of a Multi-scale method to predict large aircraft component failure taking into consideration Manufacturing Uncertainties for Predictive Virtual Simulations
232. JTI-CS2-2016-CFP04-LPA-03-08 Active Cockpit Simulator/Ground Station Facility and Test Environment enhancement
233. JTI-CS2-2016-CFP04-REG-01-05 Green Turboprop - High lift configuration integrating adaptive wing concept - Low Speed experimental validation
234. JTI-CS2-2016-CFP04-REG-01-06 High Fidelity Integrated Non-Linear MBS Modelling of Morphing Wing
235. JTI-CS2-2016-CFP04-REG-01-07 Innovative alloy development for structural part fabrication with Additive Manufacturing Technology
236. JTI-CS2-2016-CFP04-REG-01-08 Advanced Energy Storage and Regeneration System for Enhanced Electrical Energy Management
237. JTI-CS2-2016-CFP04-REG-02-03 Electrohydraulic integration of an hybrid surface actuation systems
238. JTI-CS2-2016-CFP04-FRC-01-11 Hydrophobic Windscreen Protection for Next Generation Civil Tilt Rotor
239. JTI-CS2-2016-CFP04-FRC-01-12 Flight critical wireless slip ring for a civil tiltrotor
240. JTI-CS2-2016-CFP04-FRC-02-16 Bird strike - Erosion resistant and fast maintainable windshields
241. JTI-CS2-2016-CFP04-FRC-02-17 Flight management system providing noise abatement flight procedures for compound rotorcraft
242. JTI-CS2-2016-CFP04-FRC-02-18 Full Fairing for Main Rotor Head or the LifeRCraft demonstrator
243. JTI-CS2-2016-CFP04-AIR-01-20 Development of a highly instrumented, modular fan module for aerodynamic and acoustic wind tunnel testing
244. JTI-CS2-2016-CFP04-AIR-01-21 Integrated Automated Test Bench Control System with Certifiable Test Documentation Functionality
245. JTI-CS2-2016-CFP04-AIR-01-22 Laminated and panoramic Cabin Windows for Business Jet applications
246. JTI-CS2-2016-CFP04-AIR-01-23 Novel manufacture of low weight skin without chemical milling
247. JTI-CS2-2016-CFP04-AIR-01-24 Multi-functional cabin rest area
248. JTI-CS2-2016-CFP04-AIR-02-28 Development of methods for deriving optimized shapes of morphing structures considering both aerodynamic performances and specific mechanical morphing boundary conditions
249. JTI-CS2-2016-CFP04-AIR-02-29 Development and Manufacturing of Prototype metallic parts
250. JTI-CS2-2016-CFP04-AIR-02-30 Development and manufacturing of innovative stamping dies for aluminium ribs Hot Stamping
251. JTI-CS2-2016-CFP04-AIR-02-31 Numerical methodologies and related tools for effect of defect prediction in manufacturing
252. JTI-CS2-2016-CFP04-AIR-02-32 Testing matrix optimization by interaction between numerical modelling and innovative non-contact measurement technology
253. JTI-CS2-2016-CFP04-AIR-02-33 Developing innovative joining concepts and their manufacturing methodologies
254. JTI-CS2-2016-CFP04-AIR-02-34 Hardware demonstrator development and deployment on Future Industrial Human Machine Interface (HMI) and Connected factory technologies
255. JTI-CS2-2016-CFP04-AIR-02-35 Development and deployment of new procedures and PLM Tools for A/C Ground Functional testing with Eco-design criteria
256. JTI-CS2-2016-CFP04-AIR-02-36 Development of prototype system based on Laser UT technology for high speed contactless no-couplant inspection of hybrid and thick composite structures
257. JTI-CS2-2016-CFP04-AIR-02-37 Quilted Stratum Processes (QSP) for low cost and eco thermoplastic manufacturing of complex composite parts

EARTH OBSERVATION

258. EO-1-2016 Downstream applications
259. EO-2-2016 Downstream services for public authorities
260. EO-3-2016 Augmented Copernicus Services through Heterogeneous Data Assimilation

COMPETITIVENESS OF EUROPEAN SPACE SECTOR: TECHNOLOGY AND SCIENCE

261. COMPET-4-2016 Inspection Sensor Suite
262. COMPET-1-2016 Technologies for European non-dependence and competitiveness
263. COMPET-2-2016 Maturing satellite communication technologies
264. COMPET-3-2016-a SRC - In-Space electrical propulsion and station keeping - Incremental Technologies
265. COMPET-4-2016 SRC - Space Robotics Technologies
266. COMPET-5-2016 Scientific Instrumentation
267. COMPET-4-2017 Scientific data exploitation
268. COMPET-5-2017 Space Weather

INFORMATION AND COMMUNICATION TECHNOLOGIES

269. ICT-6-2016 Systems analysis and technology infusion study of new paradigms in cloud computing and their evolution

270. FUTURE AND EMERGING TECHNOLOGIES

271. EUROPEAN COOPERATION IN SCIENCE AND TECHNOLOGY (COST)